Serving Seattle to Mount Vernon — free on-site estimates
Siding repair · Arlington, WA

Siding Repair in Arlington, WA

Damaged, rotted or leaking siding replaced and matched to the rest of your home. When boards crack, swell or pull loose, water has usually been reaching the sheathing for a while. We open the wall, repair what is behind it, add the flashing that was missing and install siding matched to your house, so the repair blends in and the wall stays dry. We serve homeowners across Arlington and nearby Marysville and Lake Stevens.

Licensed, bonded & insured · 24-Month Workmanship Warranty · Free on-site estimate
Before: Wall stripped to new house wrapBefore
After: New lap siding and trimAfter

New lap siding and trim

Arlington homes

Why siding repair comes up so often in Arlington

Arlington homes carry a wide range of siding: fiber cement and LP SmartSide on newer houses, original wood lap downtown, and T1-11 on older rural homes and shops. T1-11 panels delaminate at the bottom edge and around windows, and hardboard swells once its coating fails. On walls facing the open valley the damage spreads quickly. We replace damaged pieces or entire elevations, add house wrap and flashing behind the new siding, and match profile and color so the repair blends in, on garages and outbuildings as well as the house.

Arlington blends small-town and rural housing. The historic downtown along Olympic Avenue is ringed by older homes, some from the early 1900s, with wood lap siding, front porches and original trim. Around Smokey Point and Gleneagle, most houses are 1990s–2010s subdivisions with fiber cement, engineered wood or vinyl siding and pressure-treated decks. Beyond the city edges, homes sit on larger lots with detached shops, barns and long decks wrapping the house. Older ramblers and manufactured homes on acreage are common as well, many clad in T1-11 panels and expanded with additions built over the years.

Arlington sits where the North and South Forks of the Stillaguamish come together, and the valley floor around it is wide, open farmland. Storms sweep across with little to stop them, so walls, decks and outbuildings on open lots take hard, wind-driven rain. Winter fog settles into the river bottoms and keeps wood damp for long stretches. Being farther inland, Arlington can also see colder snaps than towns right on the Sound, and freeze-thaw cycles open caulk joints and crack paint, letting water work deeper.

Our crew comes out from our Woodinville office, and we also work in nearby Marysville, Lake Stevens, Stanwood and Mount Vernon.

Warning signs

When to call about siding repair in Arlington

  • Old siding with no house wrap behind it
  • Boards that are cracked, warped, loose or missing
  • Paint that fails on one wall year after year
  • Soft or rotted siding near the ground, windows or roof lines
  • Stains or water marks inside, below windows
Our process

Our siding repair process, step by step

1

Inspect the wall

We check the siding and probe the sheathing behind it at the problem areas.

2

Plan the scope

Repair a section or replace a wall: we show you the options with prices.

3

Open and repair

Old siding comes off; rotted sheathing and framing are replaced.

4

Wrap and flash

New house wrap, flashing tape at windows and kick-out flashing at roof lines.

5

Install and finish

New siding and trim, caulked and primed or painted, site cleaned.

Our work

Recent siding repair projects near Arlington

See all projects →
Rotted siding corner repair
Board and batten siding replacement
Board and batten siding replacement

What we do in Arlington

Siding repair

Replace damaged or rotted boards and match the profile and paint.

Full re-siding

Strip, wrap, flash and install new siding on one wall or the whole house.

House wrap and flashing

New weather barrier and window flashing behind the siding.

Cedar siding and shingles

For homes that need to keep their original look.

Fiber cement siding

Durable lap and panel siding that resists rot, insects and fire.

Trim and corner boards

New trim, corners and casings that shed water.

Local know-how

Neighborhoods and permits in Arlington

Smokey Point and the plats around it are mostly 2000s construction, so flashing and siding defects lead the list. Gleneagle’s homes near the golf course sit on wooded ground where shade and tree debris keep roofs and decks damp. Older homes near Olympic Avenue downtown need careful trim and porch work. Rural properties on the valley floor toward the river face the most wind and ground moisture, and their outbuildings often need as much attention as the house.

Inside city limits, permits come through the City of Arlington. Small like-for-like fixes, like replacing rotted trim or a section of siding, often don’t need one, but structural repairs, new decks and larger replacements usually do. Many rural homes nearby are in unincorporated Snohomish County instead, so we confirm the right office and its requirements before work begins.

Compare

Siding materials compared

SidingTypical life hereUpkeepGood to know
Fiber cement30–50 yearsRepaint roughly every 10–15 yearsWill not rot, fire-resistant, heavy to install
Cedar20–30 years with carePaint or stain every 5–8 yearsBeautiful, but needs regular care in our rain
Engineered wood25–30 yearsRepaint roughly every 10 yearsLighter than fiber cement, treated against rot
Vinyl20–30 yearsWash once a yearLow cost, can crack in cold and fade in sun
Pricing

What siding repair typically costs in Arlington

ProjectTypical scopePrice rangeTimeline
Patch repairA few boards and the wrap behind them$800 – $3,0001–2 days
One wallStrip, wrap, flash and re-side one elevation$5,000 – $15,0003–6 days
Several wallsTwo or three elevations with trim and flashing$15,000 – $30,0001–2 weeks
Whole houseFull re-side in fiber cement or engineered wood$30,000 – $65,000+2–4 weeks

These are typical 2026 ranges we see for siding repair in Arlington and nearby cities. Your price depends on what we find once the area is open, access and height, and the materials you choose. Every estimate is free, in writing and based on an on-site inspection with photos.

Guide

Siding repair in Arlington: cost and timing

Most common causes

No clearance at the bottom

Siding that touches soil, mulch, roofs or decks soaks up water at the bottom edge.

Missing flashing at openings

Windows, doors and roof edges without flashing send water behind the siding.

Old or torn weather barrier

Felt paper and house wrap wear out, so water that gets past the siding reaches the sheathing.

What drives the price in Arlington

Siding repair in Arlington depends on the material, the size of the area, how much sheathing behind it is damaged, how high the wall is and how many windows and corners need flashing. A section repair is a fraction of the cost of re-siding a wall. You get a written price after the free inspection.

Typical timeline

A small patch is often finished in a day or two. Re-siding one elevation usually takes several days, and a whole house can run from about a week to three weeks.

Warranty

Backed by a 24-month workmanship warranty

Written scope

You know exactly what is included before work starts, with photos of what we found.

Our own crew

The people who quote your job are the people who do it, start to finish.

Clean site daily

Debris is hauled away and your yard is left the way we found it.

24 months covered

If our workmanship fails within two years, we come back and make it right.

Reviews

What homeowners near Arlington say

“Gave an honest and reasonable quote. Restored water damaged siding, looks great. Alex was responsive and gave me a quote for replacing the whole house too, but I opted to wait and just fix the damaged spot. He worked around our window and hvac with no issue.”
NK
Neal K.
Verified review review · May 2026
“We're extremely pleased with the work Alex and the team completed on our home. They gave the entire exterior a fresh new look with new siding, renovated our front porch, and built an additional side porch and back deck. They also replaced several of our…”
CD
Casey D.
Google review · Sep 2026
“As a Condominium owner finding contractors that can work with multiple concerns at once is a challenge. The team at Eco Home Repair has been our go-to for several projects including deck and front porch repairs, siding replacement, chimney chassis repairs…”
CS
Cynthia S.
Google review · Apr 2026

5.0 average from 106 reviews on Google, Thumbtack, Angi, HomeAdvisor and Yelp. Read our reviews on Google.

FAQ

Questions Arlington homeowners ask about siding repair

How far is Arlington from your crew?
Arlington is a short drive north of our Marysville location, so inspections are usually easy to schedule. We cover Smokey Point, Gleneagle, downtown and the surrounding rural areas. Each inspection is free and comes with photos of the damage and a written estimate you can review on your own time.
Can you match my existing siding in Arlington?
Usually yes. We match profile and reveal and paint the new siding to blend with the rest of the house.
How long does siding replacement take?
A single wall is often a few days. A whole house usually takes one to three weeks depending on size and repairs behind the siding.
Do you replace the house wrap too?
Yes. When siding comes off we install new house wrap and window flashing so water stays out of the wall.
Which siding is best for Pacific Northwest weather?
Fiber cement is the most durable choice for most homes here. Cedar is beautiful but needs regular paint or stain. Engineered wood is a good middle option.
Free estimate

Tell us about your siding repair project in Arlington

  • Licensed, bonded & insured
  • Free on-site estimates
  • 24-month workmanship warranty

Tell us what needs repair

Tell us what you're seeing. We usually reply the same day.

Book a free siding repair inspection in Arlington

We inspect the damage on-site, show you photos of what we find and give you a written price before any work starts.

Get a Free Estimate