Serving Seattle to Mount Vernon — free on-site estimates · Free on-site estimates · See current offers
Fascia & soffit repair · Redmond, WA

Fascia & Soffit Repair in Redmond, WA

Rotted fascia, sagging gutters or soft soffits? We replace the damaged wood and fix the roof-edge drip that caused it.

  • From $500
  • Free on-site estimate
  • 24-month warranty
5.0 · 113 reviewsLicensed & insured
Before: Rotted siding corner opened upBefore
After: Corner rebuilt, sided and paintedAfter

Corner rebuilt, sided and painted

Prefer to talk? Call (425) 600-7002

Rotted fascia, soffits and rafter tails replaced, with drip edge so the roof edge stays dry. When gutters overflow or the roof has no drip edge, the roof edge gets soaked every storm and slowly rots. We replace damaged fascia, soffits and rafter tails, add drip edge and venting, and leave a solid edge ready for your gutters. We serve homeowners across Redmond and nearby Sammamish and Woodinville.

Licensed, Bonded & Insured
24-Month Workmanship Warranty
BBB A+ Accredited
5.0 from 113 Reviews
Redmond homes

Why fascia and soffit repair comes up so often in Redmond

Redmond’s wooded neighborhoods, from Education Hill to the Bear Creek area, drop plenty of needles and leaves into gutters. When gutters overflow, water soaks fascia boards, and the rot spreads into sub-fascia, rafter tails and soffit framing. We also see damage on homes where the original roof was installed without drip edge. Our crew removes soft fascia, replaces or sisters rafter tails, installs new soffit material with ventilation, and adds drip edge. Gutters are reset with the right pitch so water flows to the downspouts rather than spilling over the front edge.

Redmond grew quickly from the 1970s onward, and its housing reflects that. Education Hill and Grass Lawn are full of 1970s and 80s two-story homes and split-levels, many with cedar or hardboard lap siding and attached wood decks. Idylwood and the slopes toward Lake Sammamish have a mix of older cabins converted to year-round homes and newer view houses. Bear Creek and the hills to the east have larger 1980s through 2000s homes on wooded lots. Downtown and Overlake have added many townhomes and apartments in the last two decades, often with small balconies and mixed siding materials.

The Sammamish River valley runs through the middle of Redmond, and cool air and fog settle there on winter mornings, keeping lower walls and decks wet longer. The surrounding hills, especially Education Hill and the Bear Creek area, are heavily wooded, so many homes sit in shade for most of the day. Rain comes in long, steady stretches rather than short bursts. Wood that never fully dries between storms is the pattern behind much of the rot we find, along with moss on roof edges and decks.

Our crew comes out from our Woodinville office, and we also work in nearby Sammamish, Woodinville, Kirkland and Bellevue.

Warning signs

When to call about fascia and soffit repair in Redmond

  • Gutters that sag or pull away from the house
  • Peeling paint or soft spots on the fascia
  • Moss and debris building up at the roof edge
  • Birds, bees or rodents getting into the eaves
  • Holes or stains in the soffit
Our process

Our fascia and soffit repair process, step by step

1

Inspect the roof edge

We check fascia, soffit and rafter tails from a ladder and photograph damage.

2

Remove gutters if needed

Gutters come down carefully to reach the fascia.

3

Replace rotted wood

Fascia, soffit and rafter tails rebuilt to solid wood.

4

Add drip edge

Drip edge under the roofing so water clears the board.

5

Finish

Primed or painted and ready for gutters to go back up.

Our work

Recent fascia and soffit repair projects near Redmond

See all projects →
Side wall after re-siding
Gable wall after siding repair
Eco Home Repair project

What we do in Redmond

Soffits and vents

New soffit panels and vents so the attic can breathe.

Drip edge

Metal drip edge so water clears the fascia.

Fascia boards

Rotted fascia replaced with primed or rot-resistant boards.

Pest damage

Close up openings where animals got into the eaves.

Gutter-ready

Solid backing ready for your gutter installer.

Rafter tails

Rotted rafter ends sistered or rebuilt.

Local know-how

Neighborhoods and permits in Redmond

Education Hill homes stay shaded under big trees, and the damage concentrates at north walls, fascia and decks. Grass Lawn and Overlake have more sun but older flashing details, so window sills and roof-to-wall joints fail first. Idylwood, close to Lake Sammamish, sees moisture at lower siding and docks or stairs near the water. Out toward Bear Creek, larger homes with tall walls and big decks carry the most exposed surface.

Swapping out a few rotted siding boards or a small section of trim like-for-like often doesn’t need a permit. Replacing joists, posts or wall framing, building a new deck, or residing a large wall is a different story. Our office contacts the City of Redmond ahead of time, files what is required, and lines up inspections so the homeowner isn’t stuck chasing paperwork.

Compare

Fascia and soffit materials

MaterialRot resistanceUpkeepGood to know
Primed wood fasciaLow to mediumRepaint every 5–8 yearsMatches most older homes
Cedar fasciaMediumPaint or stain on scheduleHolds paint well, natural look
PVC or composite fasciaVery highOccasional washingGood choice where gutters overflow
Aluminum wrap over woodHighLittleProtects the board, but hides rot if wood was wet
Pricing

What fascia and soffit repair typically costs in Redmond

ProjectTypical scopePrice rangeTimeline
Small sectionA few feet of fascia or one soffit panel$500 – $1,5001 day
One side of the houseFascia, soffit and drip edge along one roof edge$2,000 – $5,5001–2 days
Rafter-tail repairFascia plus rotted rafter ends sistered or rebuilt$3,500 – $9,0002–4 days
Whole houseRoof edge, soffits and venting all around$7,000 – $18,0001–2 weeks

These are typical 2026 ranges we see for fascia and soffit repair in Redmond and nearby cities. Your price depends on what we find once the area is open, access and height, and the materials you choose. Every estimate is free, in writing and based on an on-site inspection with photos.

Guide

Fascia & soffit repair in Redmond: cost and timing

Most common causes

Blocked soffit vents

Poor attic ventilation traps moisture at the roof edge.

No drip edge

Without drip edge, water runs behind the gutter and soaks the fascia and roof deck.

Pests

Gaps in rotted soffits let birds, bees and rodents into the eaves.

What drives the price in Redmond

Fascia and soffit repair in Redmond is priced by the length of damaged roof edge, roof height, rafter-tail damage and gutter work. A few feet of fascia is a quick fix; a whole side of the house takes longer. You get a written price after the free inspection.

Typical timeline

Most roof-edge repairs are wrapped up in one to three days, a bit longer if the gutters come down or rafter tails need work.

Warranty

Backed by a 24-month workmanship warranty

Written scope

You know exactly what is included before work starts, with photos of what we found.

Our own crew

The people who quote your job are the people who do it, start to finish.

Clean site daily

Debris is hauled away and your yard is left the way we found it.

24 months covered

If our workmanship fails within two years, we come back and make it right.

Reviews

What homeowners near Redmond say

5.0 average from 113 reviews on Google, Thumbtack, Angi, HomeAdvisor and Yelp. Read all our Google reviews · Leave a review

FAQ

Questions Redmond homeowners ask about fascia and soffit repair

Is fog in the Sammamish Valley part of Redmond really a problem for siding?
It can be. Cool, damp air settles in the valley on many winter mornings, and siding and decks on lower lots stay wet longer. Combined with shade from trees, that slow drying gives rot a head start. We look closely at north and low walls during inspections for homes near the valley floor.
Can you replace just part of the fascia in Redmond?
Yes. We replace the rotted sections and scarf-join new boards so they look continuous once painted.
Do you install gutters?
We prepare the fascia and can remove and reinstall existing gutters. For new gutters we coordinate with a gutter installer.
What is a drip edge?
A metal flashing at the roof edge that sends water into the gutter instead of behind it onto the fascia.
Do you replace gutters too?
We remove and reinstall existing gutters and can coordinate new gutters with a gutter company.
Free estimate

Tell us about your fascia and soffit repair project in Redmond

  • Licensed, bonded & insured
  • Free on-site estimates
  • 24-month workmanship warranty

Tell us what needs repair

Tell us what you're seeing. We usually reply the same day.

Book a free fascia and soffit repair inspection in Redmond

We inspect the damage on-site, show you photos of what we find and give you a written price before any work starts.

Get a Free Estimate